[Tool] Lenovo (H2O) Bios Unlocker and Locker

equal to this.

newdriverdl.lenovo.com.cn/newlenovo/alldriversupload/88365/BIOS-H1CN44WW.exe

i have the same laptop as shinasoba

Ok, is the usb GPT formatted?

Yes. Fat32. however, the name of the key has capital letters. and they don’t change. I tried several sticks

Ok, the laptop give some life sign, the other guy had the self healing problem, your at least make some noise, blinking etc? Something that make it feel alive?

the only sign of life it gives are the colored LEDs on the keyboard and that’s it. nothing more

Just in case, you had the FN Lock enabled, prior to brick?
If yes try only with the R key, but I’m not sure if Fn lock work even in early boot.

I’ve never touched anything as far as the FN is concerned. In fact, in my opinion it works, because when I press it, only certain letters of the keyboard light up. therefore there should be no problems. I ask you for the avoidance of doubt, fn next to the Windows key not fn / esc that the legion has as an extra key right?


Ok test R. Wait

Yes, the usual Fn, Near windows Key

you have to be a really patient man holding fn+R and wait for the first beep.

Yes, if thing go well, even before beep, the carger light should blink

my friend, excuse the question, but how long? 4 minutes? 10?

Should be pretty quick, the charger light is blinking?

Edit: For future something like 2-3 min

Yes

Have you a usb with a light, just to see if any read is performed?

I’ve done all. even the usb. it doesn’t show any signs, but it could be the old usb.

Just to be sure:
What was the Bios Version that you were one?
What Setting you changed?
Have you done a CMOS reset?

BIOS version 44. Changed RAM speed settings. CMOS reset you intend to disconnect both the normal battery and the small one right? else to do?

Yes, disconnect batteries, AC and hold the power button for a 20 sec , and try.

nothing

Ok, plug the usb in another PC:

  1. open diskpart
  2. write

    1
     
    list disk
     
  3. notice the usb disk numer and write
    1
     
    sel disk #diskNumber_here
     
    1
     
    list par
     
  4. post the output