Unknown Flash Image Tool Error

[Mr.3]

Decomposed SKU Value: “Intel(R) Tigerlake LP B0 Chipset - TGP-LP-B0 Premium U”.

FIT version used to build the image: 15.0.23.1706

Error 179: [Fit Actions] Failed to parse CSE region.
Error 10: [Ifwi Actions] Failed to decompose Region. Failed to decompose CSE data.
Error 18: [Ifwi Actions] Failed to generate decomposed files. CSE Region
Error 18: [Ifwi Actions] Failed to generate decomposed files.
Error 9: Failed to decompose Image.

Edit by Fernando: Thread title shortened and specified

[Koekieezz]

the csme are all 0 that could be the problem. if it’s applied correctly then it wont show 0s. Maybe send your bios image here?

[Mr.3]

32 MB file on MEGA

this file check and tell me what the result

[lfb6]

See:

[Help please] Dell Optiplex 7090 - Enabling Intel ME

Hello all, I have two Dell Optiplex 7090s. One has Intel AMT Enabled, one has it disabled. I would like to enable Intel AMT on the second PC. Posts on this forum suggest that a good way to start investigating is to get an image of the I2C ROM, use the Flash Image Tool to enable AMT in that image then flash back. (I have a programmer to bypass the locks of updating from software.) I believe the programmer is reading the ROM consistently (checksum is the same until I power on the PC), and MEA re…

Replace EFS partition in the ME of your dump with corresponding EFS partition from stock CSME.