Warning: Have Option ROM can not be invoke(Vendor ID: 197Bh, Device ID: 2363h)

BIOS/UEFI Modding BIOS modules (PCI ROM, EFI and others)
1

I have warning: “Have Option ROM can not be invoke(Vendor ID: 197Bh, Device ID: 2363h)”. Jmicron sometimes an error timeout and system crashes.
My SSD is on Asmedia asm106x firmware v. 0.951 (2-Lane USB 3.0 and SATA 6G add-on card http://www.speeddragon.com/index.php?con…ductInfo&Id=444). Before Asmedia, everything worked. GA-EX58-Extreme Bios F13u mod (Intel RAID for SATA 12.6.0.1867. Realtek LAN 2.54. Jmicron RAID SATA 1.07.28). Maybe I need to flash Asmedia? Help me, please.

2

@Vlad_Dracula :
Welcome at Win-RAID Forum!
Since your problem is Option ROM and not driver related, I have moved your help request into the "BIOS modules" Sub-Forum.
Now to your problem:
The device with the VendorID VEN_197B and the DeviceID DEV_2363 is the JMicron JMB362/JMB363 AHCI Controller.
So on the first view your problem has nothing to do with the ASMedia SATA3 add-on card.
Questions:
1. How many disk drives (SSD and HDDs) are running in your system and to which SATA Controllers are they connected?
2. Which are your current BIOS settings regarding the JMicron SATA Controller?
3. Which devices are connected to the JMicron SATA ports?
Regards
Dieter (alias Fernando)

3

I have 3hdd and 1ssd. Ssd - bootable on asmedia. 2Hdd - raid1 on Intel + 1 in normal mode on Intel. Jmicron - only Blue-ray and esata, no hdd or ssd connected. Jmicron - ahci mode.

4

What happens, when you unplug both JMicron connected devices? And what happens, when you set the SATA mode of the JMicron Controller to "IDE"?

5

Unplug - nothing cganged. IDE mode - no error, but of course no hot plug esata.

6

It seems, that there is an incompatibility between the ASMedia and the JMicron Controller, if both are running in AHCI mode.
By the way: You may be able to get the "hot plug" feature for your eSata drive even if it is running in IDE mode, if you use a tool like HotSwap (>LINK<).

7

I hope the problem is solved. JMicron in “IDE”, and hot plug function with Drv_R1.17.65_WHQL_eSATA. So far everything is normal. Then, I’ll buy Adaptec HBA 1000-8i. Sorry for my English, rarely speak. Thank you very much for your help.