Windows 10 64 bit PRO - IRSTRSV event id 0

Windows 8.1 64bit PRO updated to Windows 10 PRO - intel rst by station-drivers

I see this irstrtsv error in the Event Viewer.

id event 0

The description for Event ID 0 from source irstrtsv cannot be found. Either the component that raises this event is not installed on your local computer, or the installation is corrupted. You can install or repair the component on the local computer.

"Error: Unable to read LBA sector directly. : The parameter is incorrect."

I do not see a performance issue due to the error.

This irstrtsv error occurs when the system starts, there is a cluster of 5 errors every few seconds, then repeats every 2/3 minutes with another cluster of 5 irstrtsv errors and continues until I shut it down.

I tried to uninstall and reinstall irst and also install older versions 13 and 12 but always with the same problem

Mainboard: Asus Z87 deluxe
IRS driver installed: intel rst
bios mode: RAID
HDD: 2 SSD + 3 HDD (2TB) RAID 5

@ Beppe75:
Welcome at Win-RAID Forum!

The Intel RST(e) drivers v14.5.2.1088 make problems and I do not recommend to use them for daily work.

I know, what means “irst”, but I do not know, what means “rtsv”. Can you help me?

Dieter (alias Fernando)

It is the source of the event:

Thanks for your help

oops … I think that the origin of the problem is not intel rapid storage but Intel Rapid Start technology (irstrtsv) !!!

excuse me

Thanks for the clarification.
Were you able to solve the problem?

not yet , also I wrote on the forum intel, expect answers about