Other SATA Controller: EFI Marvell SATA ACHI: 1.1.0.1007 → 1.1.0.1020 ORM Marvell 88SE9192: 1.0.0.0034 → 1.0.0.0034
Intel Management Engine: 9.1.25.1005 → 9.1.37.1002 (Due to the updated IME, once the BIOS is flashed, run the following Flash Programming Tool command in a administrator level CMD window: fpt -greset The computer will reset after this command
Re-enabled the 1024MB option for Integrated Video Memory Allocation
New boot splash screen:
Updated CPU Microcode: From:
To:
A special thanks to @Lost_N_BIOS , @SoniX , @Fernando , and @chinobino for their guidance and help in this project!
Below, the BIOS is also attached in a two part .zip file. Unzip each file and then combine the two expanded files together to make one .zip file:
You can install 7zip, and 7zip the file, then rename to zip and tell downloaders to rename to .7z extension after downloading. Or, install latest WinRAR if you are not using already, then when you are creating the rar or zip, choose compression level “best” never mind, all still around 9MB
It’s a mess downloading it as it’s attached now, due to forum renaming attached files, but it works (possibly only because I’m not new to this, other users may run into issues)
Tinyupload says “Forever” I’ve seen a file not last forever, but that’s rare.
does this BIOS fully support MVMe M.2 onboard connected SSD
Crucial P1 1TB 3D NAND NVMe PCIe M.2 SSD
there is as well F9b beta issued by Gigabyte with completely no comments nor revision description.
I would like to give a try, but can not find any info, and recently after starting my new job, have no time not force for to play with revisions. I have problems with multi boot from SSD on the stage I finished a year ago. And moderate overclocking this Board in current config. Only Makrium solves my life…
Use the files in this thread. I had to split the file into two zip files. It should unzip into one BIOS file. I am using an M.2 SSD on the board with the modded BIOS.
