Intel RSTe Legacy RAID ROM & SataDriver v4.0.0.1016

@Fernando
@SoniX

Hi
Here is the 4.0.0.1016 RAID modules.

rste_rom_4.0.0.1016.zip (112 KB)


Wow! IRSTe found! Only SCU is not enough. :slight_smile:
Be sure to add in the new release of UBU. Thank you very much! :slight_smile:

Yes, unfortunately no SCU, but will keep looking :slight_smile:

Maybe this is of use…

X9DRTP-intel-scu-4001016.zip (58.8 KB)


It only OROM. You can view the availability of EFI module? Or refer to the BIOS where found this version SCU?

Added
Already found. SuperMicro X9DRT-P

2 Added:
Good news! I found IRSTe SCU version 4.1.0.1026. After treatment in the near future will add a new version of UBU. :slight_smile:


It only OROM. You can view the availability of EFI module? Or refer to the BIOS where found this version SCU?

Added
Already found. SuperMicro X9DRT-P

2 Added:
Good news! I found IRSTe SCU version 4.1.0.1026. After treatment in the near future will add a new version of UBU. :slight_smile:




Fuzzy on your response… It was useful, yes?

Side note:
Also, Supermicro X9DRT-P works perfectly after flashing (2822) “Intel(R) RAID for SATA - v4.0.0.1016” → “Intel(R) RAID for SATA - v12.9.0.2006” (8086-2822_v12902006_mod-for-X79). Will be pushing the update to the other 3 nodes, in a vmware non-HCL lab vsan cluster. Hopefully the vsan observer will show some kind of benefit, as one can only hope.