[ARCHIVE] Outdated UBU Tool related Questions, Reports and Suggestions

Anonymous_465 · December 3, 2013, 8:21pm

I already updated everything all the OROMS, the VBIOS was the last one when the update came out so everything else worked.

SoniX · December 4, 2013, 2:18am

Zitat von Gast im Beitrag #231
I already updated everything all the OROMS, the VBIOS was the last one when the update came out so everything else worked.

Try to do the update again. Replace VBIOS to version 2158 and then 2170.
I think that the most likely failure was when flashing.

Fernando · December 4, 2013, 2:55pm

Thanks for the new version.
The start post has been customized as well.

friskies · December 22, 2013, 8:55pm

Updated everything on my asrock z77 extreme4, very easy! Thanks for making this!

elisw · December 23, 2013, 7:58am

tried the tool on a H81M-A bios (ASUS). all went well in the modding but cannot flash it as the modded bios doesn’t pass the check (security verification failure on either bupdater or ez flash II) .
tried both with or without CPU microcode update.

SoniX · December 23, 2013, 12:50pm

On Asus motherboards can use UBF (USB BIOS Flashback).

elisw · December 23, 2013, 1:08pm

On Asus motherboards can use UBF (USB BIOS Flashback).

UBF is available on selected motherboards… H81M-A is a really basic one.

saglamtimur · December 23, 2013, 1:21pm

I use afudos to by-pass security check on my AsRock. It should work on Asus boards as-well. You may flash with moded bios with afudos, try it first. In my case afudos concerned about it’s file size. So I followed below steps and succeeded.
1- Flash with the original bioas file using in-bios flash tool.
2- Use afudos with /O switch to backup the bios file named eg:backup.rom
3- Mod this backup.rom file
4- Flash bios with this file using afudos.

Hope it helps.

SoniX · December 23, 2013, 1:33pm

Quite possibly, but at your own risk
4* - afudos backup_mod.rom /gan

elisw · December 23, 2013, 2:02pm

Afudos used to be the tool for Asus but now has been superseded by bupdater.

ErfanDL · January 2, 2014, 10:22am

Hi. I cant update marvell ROM. when I will update marvell rom just wait and do nothing

Update OROM Marvell SATA 91xx Device Device ID 9120…

SoniX · January 2, 2014, 7:08pm

Attach the BIOS file to study.

ErfanDL · January 3, 2014, 7:14am

Attach the BIOS file to study.

ASUS P8P67 BIOS: http://dlcdnet.asus.com/pub/ASUS/mb/LGA1…7-ASUS-3602.zip

SoniX · January 3, 2014, 1:00pm

Attach the BIOS file to study.

ASUS P8P67 BIOS: http://dlcdnet.asus.com/pub/ASUS/mb/LGA1…7-ASUS-3602.zip

MOD

P8P67-ASUS-3602.zip (3.09 MB)

error-id10t · January 6, 2014, 8:06am

Thanks for another update.

Question on Point1, does this now make the MC update so the modules remain as-is?

ErfanDL · January 6, 2014, 12:09pm

Thanks for this update. everything work perfectly for me

gpvecchi · January 6, 2014, 4:12pm

Thanks for the update! Will this version "re-add" the empty module to a bios modded with with previous version, or do I have to re-mod from stock?
Thanks!

Francko1979 · January 11, 2014, 5:13pm

Hi Sonix,

Im really new to all this BIOS modding. Im contacting you cause I need help with the following.

I have an ASUS P8Z77 WS board that I just bought, supports SandyBridge processors D2 stepping, but my problem is that I have an ES (Engineering Sample) Core i7 2600K D1 stepping processor which is not supported by it.

Can you help me or edit the BIOS to insert the D1 stepping microcode for my ES processor in the P8Z77 WS?

I would really appreciate any help you can give me. My Sandy CPU works great, and I don´t want to spend more money to buy a newer Ivy CPU.

Thanks a lot!

Fernando · January 11, 2014, 5:44pm

@ Francko1979:

Welcome at Win-RAID Forum!
I am sure, that SoniX will answer your question.

Regards
Fernando

Francko1979 · January 11, 2014, 9:20pm

Hi Fernando,

thanks a lot!
Yeah, Im really looking forward to it.
Got all my set up waiting for the right file to make my rig boot up

Thanks again