i am not tested it yet because still outside home brother
Oh, no. You can’t modify it like that.
First, the syntax was broken. Don’t you see that the lines have moved to the right? At least, you had to keep “end” codes for each of "one of prompt"s. It works so that “suppress if” should be followed by the “end” and also the extended conditions are followed by the “end”. Second, for AMI BIOSes any changes in the IFR module associated with a decrease/increase in the total number of elements must be synced with another table by making corresponding changes in the AMITSE setup data module. After all, it is AMITSE that is responsible for the structure of the final BIOS Setup Utility.
2 Likes
Wow, welcome back, this change was made because there was success before this (single option move). Multiple options are also a first try. thanks for your clarification 
no i dont mod it bro , it generated by IFR extractor,
suppress missing is from bios edited by 553349149
can you help unlocking that menu
Good Morning.
Le’ts Overall Simply Clarify this:
That means;
that
End
is like for a Fully Command written Row end. so it says you can go ahead with the next coding row, you had to type for
and that so on, until at least to be need for.
iama right @Sweet_Kitten ?
1 Like
Sadly, but no. Im online, but still not back. I can access the network from my smartphone, but there is no access to the computer.
Everything will be fine, looking forward to your return
Also, have you tried 1.bin? It changes AMITSESetupData. Sometimes this is enough to make the options visible.
If not, I’m going to re-edit 2.bin.
1 Like
thanks for your help brother, i extracted 1.bin from capsule to INTEL IMAGE with uefi tool ne 62 and flash with intel FPT csm 16, you awesome, now all hidden avx512 menu showing up and toggle avx512 for enable and disable is worked
hope you share some little tutorial to unlock that menu, i need to unlock other menu like BIOS Lock and flash protection range registers (FPRR) in PCH security menu
so i dont need to disable FPRR or bios lock with setupvar if it enable again sometime with their failsafe setting is set to on
The approach doesn’t always work, sometimes you just need to change the suppression condition like kitty mentioned, sometimes you need to change multiple modules at the same time. Take AVX512 as an example, find the QuestionId A7 00 (offset 112A4) of AVX512 in the AMITSESetupData module, change the next 15 bytes to default 09→user 0D
i see in uefi editor, default user acces is 09,i think is suppression get disabled, if we change user acces from 09 to 0D (hex to decimal=13) right ? and that value hidden get showing up ?
Hi. I was looking for the same mod, since it was removed from bios too.
Here is the bios link if you want to take a look.
Bios has already the microcode patch for AVX512, but setting is hidden in bios.
Thanks
1 Like
Check inbox brother
Hi. You mean me?
I don’t have anything on inbox 
on overclock forum 
@553349149
Hello, the modified bios link is expired,can you please provide avx 512 for asus h610m e d4,i am in great need of it, thank you.
hy i create complete tutorial recently, you see my thread in my profile, use that to modified hidden menu in bios yourself
dont forget use change 09 to 0D level user( mention in here) to make it showing up
note: i did not using that asus h610m anymore, so i am upgrade to gigabyte b660m now and still be able to enable that avx512 again
oh,thankyou for replying,iam new here and new to this,dont know what 09 and 0d is lol,but i’ll check your tutorial,i tried downgrading bios too but didnt work,then i found your thread,just want some extra performance in rpcs3 thats it lol,its fine,i’ll try following your tutorial,thankyou
