Hello
I am a Japanese overclocker
I’m competing in Geekbench 3, but I heard that 7 is the best OS than 10
I want to introduce Windows7. I would like to know in detail how to install Windows7.
Please forgive me that it is difficult to read because it is conversion from Japanese.
It is not that hard to install, you pretty much just click next a few times, select the drive to install to, click next and it will finish itself
Z390, but …
I want to know a series of procedures and necessary things after getting Windows7.
@roccat1970 :
Welcome to the Win-RAID Forum!
Did you read the start post of >this< thread, before you started your own thread?
Regards
Dieter (alias Fernando)
I used the drivers on this thread: [Solution] Win7 drivers for USB 3.0/3.1 Controllers of new Intel chipset systems
to install Windows 7 on a ASRock H310M-HDV, works just fine. I slipstreamd them with my batch files, bit I think you can use a tool like NLite as well.
Because the content of the thread is difficult,
New thread
I want to ask you only for ASUS
sorry
Do you think, that the installation of Win7 onto a system with an ASUS mainboard is different from systems with a Gigabyte, ASRock or MSI mainboard?
No, it isn’t!
So tell me more
Why should I post everything several times? I gave you the link to the thread, where you can get the required information.
How to deal with that thread
I can’t understand because I’m an amateur
@roccat1970 :
Do you know how to get a Windows OS installed?
Why do you want to install an outdated OS, which doesn’t support the newest hardware, onto a rather new PC with an Intel 300-series chipset?
My advice: Run Win10 with your new PC. If you want to play with Win7, get an old mainboard, whose hardware is supported by the OS.