[OFFER] Gigabyte GA-970A-DS3P rev2.x BIOS Mod NVME Added


#123 post. Bios with password :frowning: i flash it too

File nvmemod.bin

@w8p @Eduar Sorry, that bios is from user bjornier which should not be used (partly my fault for not informing), anyways here is the bios that is modded from stock bios for GA-970A-DS3P FX (rev. 2.1).

to kick dual bios flashback, turn off pc, press and hold power button and reset button at once for 11 seconds and release it, then turn it on, so that the bios backup will attempt to flash its own bios. you guys could recover from the password, or the otherway is shorting pin 1 and 6 on your bios chip (please refer to your bios chip model and know the polarity).

970A3PFX.rar (2.68 MB)

Hi. Which link to use to download the modified bios for ga970-ds3p motherboard version 1.0 with updated microcodes? Some links have expired.

Adresse to them using @username and they’ll get notified, or get UBU tool here in forum and update yourself the mcodes

970A-DS3P_F2j-NVME-uCodeUPD.zip (2.7 MB)

This is the bios in #77

hello sorry my english is not very perfect, could someone help me to modify my bios of my board model 970A-DS3P rev 1.0 F1 to be able to use a kingston 500gb nv1 ssd sorry if I can’t attach my bios but I’m new and they still don’t allow me to upload the file but it is the F1 version of this page https://www.gigabyte.com/ar/Motherboard/GA-970A-DS3P-rev-10/support#support-dl-bios thank you very much in advance, I hope not to bother you.

Follow the guide here: [HowTo] Get full NVMe support for all Systems with an AMI UEFI BIOS - Special Topics / NVMe Support for old Systems - Win-Raid Forum (level1techs.com)

Use the MMtool method.

EDIT: Glad you made it, enjoy it.

Thank you very much I managed to do it!!! I modified my bios and now install windows 10 on my mvme kingston ssd and everything works great, so thank you for the help.

Hello Fernando. One cuestion, how to modify mother’s bios GA-870A-UD3 rev 3.1 to support nvme?Thanks,Andy.

Your motherboard still uses AWARD legacy bios, not possible as the model of this thread that uses modern UEFI bios.
Use alternative methods in this section Latest Special Topics/NVMe Support for old Systems topics - Win-Raid Forum (level1techs.com)

EDIT: Its old Gigabyte Hybrid bios transition, not standard PURE UEFI

Hello thanks for reply. My mother have EFI/CMS boot options,but a very old interface.I ´ll try your recomendations thanks a lot.

2 posts were split to a new topic: [Request] NVMe Support for GA-970A-UD3 rev 3.0

Im so sorry…but as you can imagine…the file mod you referred is not my work and i cannot vouch for any modifications done by that user, you should ask that user for further clarifications.
Anyway…i do encourage you to follow the guide here presented by Fernando and try to do the mod yourself as its very easily done.
[HowTo] Get full NVMe Support for all Systems with an AMI UEFI BIOS - Special Topics / NVMe Support for old Systems - Win-Raid Forum (level1techs.com)

thanks for the speedy reply Meatwar. I tried using the guide but for whatever reason could not get it to work. Anytime I have ever messed with a hex editor the results are poor. Thanks again and good luck :slight_smile:

1 Like

Hi all,

I think I messed up my motherboard. Can someone upload bin or hex any REV 2.0 BIOS? I’ll flash it with CH341a programmer.

NVMe mod files, there’s plenty above… cleaned use the Gigabyte file.

1 Like

A post was merged into an existing topic: [HowTo] Get full NVMe Support for all Systems with an AMI UEFI BIOS

hello, can you upgrade my bios bios.zip — Яндекс Диск