[Solution] Win7/8.1 Drivers for USB 3.0/3.1 Controllers of new AMD Chipset Systems

Also when my build is fully completed, I will most likely upload a video about it to my youtube page!

1 Like

Thanks for sharing such a valuable information! I suppose everybody appreciate it!

1 Like

no problem! I could also run some benchmarks and see how it performs

1 Like

Nice one. It is quite unbelievable that will can use 7995wx in distant future when the prices calm down.

1 Like

I tried my 7995WX on WRX90E-Sage, and haven’t been able to get it to work. At all defaults I get STOP 0x0000005C, which I can fix by setting APIC mode to anything other than Auto. But I get PAGE_FAULT_IN_NONPAGED_AREA or 0x0000007E depending on what I try. Funnily enough Windows XP was no problem, was able to do the installation from start to finish on the platform.

How is it possible? Windows XP x86 do not support more than 32threads, Windows XP x64 supports maximum 64 threads CPUs.

And Canonkong drivers not mention support of wrx90 chipset.

1 Like

Yeah just 64 threads only, could still boot with all 192 enabled, but anyway I mean TRX50 isn’t mentioned either and it worked for the other user, so I think just ASUS still has issues on Zen 4 since that is an older bios. I tried both SATA and NVME.

I think there was a registry tweak to allow up to 65536 threads on 2000, wouldn’t this also work on xp?

I don’t see any practical reason to do this, because win7 supports 256 threads in stock configuration and this is more than enough. Maybe will have an ability to run later 256 thread rippers at some point. That would be cool thing for sure.

1 Like

checking in…anyone able to point me to the right direction for those pre-built isos?

1 Like

Welp, I got my T705, and it all appears to work great ! I ended up just going with Windows 7 Ultimate, but it works also on Server 2008R2. Ryzen Threadripper 7960X, 1TB Crucial T705, 16TB Toshiba HDD, Zotac AMP Extreme HOLO 3090 Ti, Corsair AX1600i, Gigabyte TRX50 Aero D rev 1.1, Windows 7 Ultimate x64 with SP1.

1 Like

Nice, but size of the pix is too small to see anything

1 Like

What the driver lack on win7 with this mainboard? I
will try to modify those drivers.

2 Likes

image
I actually got most of them installed, but there are a couple that I could not get installed yet: One of the ethernet controllers (PCI\VEN_1D6A&DEV_14C0&SUBSYS_E0001458&REV_03), the WiFi adapter (PCI\VEN_17CB&DEV_1107&SUBSYS_E0FB105B&REV_01), another USB controller (PCI\VEN_8086&DEV_1137&SUBSYS_00008086&REV_00), and 4 PCI devices that all share the same HWID: PCI\VEN_1022&DEV_14A6&SUBSYS_14A61022&REV_00

Does it support windows 7 32bit edition?

I have same question,Can anyone help me ?Thanks!

I don’t think so


Granite Ridge Okay :slight_smile:

4 Likes