@Lost_N_BIOS This my laptop had it since 2015, after updating to 213 bios it suddenly did ask for the password. “Rescue password” didn’t work when i did try to press alt + r. I don’t know if its stored in bios or not but if u can just make a stock bios and add serial, UUID, MAC etc on it, and yes those things should be on that bios dumb.
@Chuck6 - I asked because I’ve never seen password requested by BIOS unless user set it. Sorry, don’t know what ALT+R is supposed to do? OK, I will make you BIOS from stock, if you can’t get it via below method
Ohh, I see what you mean about this ALT+R and rescue password, I guess this is a thing! Did you try both methods here, sounds like second method may be what you have to use - http://techgenix.com/removing-asus-bios-…n-older-models/
See also - https://rog.asus.com/forum/showthread.ph…a-laptop-easily
@Lost_N_BIOS Believe me dude, i have tried literally every method there is. Also thanks for making me a bios! I really appreciate it 
@Chuck6 - So you already tried second method in first link? If yes, OK, I will make you BIOS now 
* Edit - I see Main BIOS DXE volume is broken/corrupted in your BIOS, so I doubt even if you could get past the password that the BIOS would work/allow entry anyway.
@Lost_N_BIOS Oh damn… does that mean there’s no way to get serial, UUDI, mac address etc from that bios?
@Chuck6 - No, all that is OK In BIOS region, there is many volumes, just the main DXE one is corrupted. Info like you mention is in padding in other area, so it’s all OK (at least looks OK )
Here, program this in >> Erase, blank check, open file, write/verify. Be sure to use 1.30 or 1.34 and BV ID
http://s000.tinyupload.com/index.php?fil…141588247266792
Then boot to BIOS, load optimized, then save and reboot back to BIOS and make any changes you need in order to boot to windows.
If this does not boot, then your original ME FW is corrupted too, let me know and I will rebuild that for you and send new BIOS
@Lost_N_BIOS I have a corrupted bios in my G751JY. I’ve tried emergency flashing stock bios at boot while holding ctrl and home, thats the only time i can the screen/computer to turn on, when its flashing the stock bios, the rest of the time i cant even get the computer to turn, i only get black screen. The bios chip is a W25Q64FVSIQ i have a SPI Flash Programmer and attatched is the bios dump using CH341A Program V1.34. Im not sure what im supposed to flash onto the bios chip, i really really need your help. I also have old bios saves from when it was working but was saved with AFU.
When i try attaching/upload bios it says “Something went terribly wrong” not sure how to attach
You can upload it on mediafire and then post only the link 
Regards
***.mediafire.com
Hi friend,
sorry for delay, I found these data into your bricked bios , could you check and say if are right ?
MAC Number : AC9E1799576E (7E067F)
P/N : 90NB06F1-M00630
Model number : EBN0WU098033458
UUID : 45502H01002344500367WU200
Try this one, it it will work , then I will unlock too :
https://www.mediafire.com/file/ryewdqqrj…rmware.rar/file
Let me know
Regards