Tried on my z77-Ds3h and so far working OK, with corresponding IRST 13.1.0 driver (latest supported). I am not big fan of these mods but this one seems to me reasonably "conservative" and at the level of manufacturers updates available (e.g. IRST - 14.x or 15.x is not supported by intel on z77). Not sure if I keep it or return to standard F11a, however.
UPDATE: Disabled Intel Anti-Theft Technology by following this guide The attached BIOS is updated. You should use command fpt -greset after flash to apply changes immediately.
Just for information after some time, I have kept the modified version on my system. I have kept the original mod as posted earlier, not the subsequent updates version.
The previous version was an SPI dump from my PC, it has leftovers inside the ME Region and NVRAM volume. I managed to clean the ME Region and manually replace the NVRAM volume with stock one. For some reason the BIOS with stock Flash Descriptor cannot be rebuilt by FITC, I have fixed the problem following this reply from plutomaniac. Afterwards Gigabyte atBIOS utility has trouble flashing my rebuilt BIOS (stucks at Erasing/Writing 0%), while Intel FPT works fine.
Hi Ferrous, I flashed your modded BIOS on my Z77-DS3H rev 1.0 but I can’t find my Samsung 960 Evo among the drives that could boot. The ssd is mounted using an Asus HYPER M.2 X4 MINI Card M.2 adapter. Can you help me? Thanks
I would like to thank to ferrous again for this bios, since the NVMe boot from PCIe SSD really works. I tried it yesterday and Kingston KC1000 works well. I placed it in PCIe x16 slot (instead of graphics card which i moved to PCIe x4 since I do not play very demanding games) and the speed is great. But it worked (a little slower but still much faster that SATA SSD) even in PCIe x4.
Of course, it would be nice to have new e.g. Ryzen motherboard, but this helps me save my investment to I5-3570+16 GB DDR3 RAM I made before.
I managed to change my i5 3550 with an i7 3770, after the change the pc resetted 3 times without bios coming up , and then it started ok, but said that the bios settings had been resetted,asked to load default values, so i just confirmed and all went well, really strange…but works ok…