[OFFER] Gigabyte GA-Z370-Aorus Gaming 7 BIOS mod

Main Menu
[Current version in BIOS file]
1 - Disk Controller
EFI Intel RST for SATA - 17.8.0.4507
OROM Intel RST for SATA - 17.8.0.4507
EFI AMI NVMe Driver present
2 - Video OnBoard
EFI GOP Driver SKL-CML - 9.0.1102
RAW GOP VBT SKYLAKE - 212
OROM VBIOS SKL-AML - 1060
3 - Network
EFI Intel Gigabit UNDI - 0.0.27
OROM Intel Boot Agent CL - 0.1.16
EFI Lx Killer Undi - 1.1.0.10
OROM QCM-Atheros PXE - 2.1.1.5
4 - Other SATA Controller
5 - CPU MicroCode
View/Extract/Search/Replace
S - AMI Setup IFR Extractor
0 - Exit
RS - Re-Scanning

╔══════════════════════════════════════════════════════════════════╗
║ Intel ║
╟─┬─────┬───────────┬────────┬──────────┬────┬───────┬────────┬────╢
║#│CPUID│Platform ID│Revision│ Date │Type│ Size │ Offset │Last║
╟─┼─────┼───────────┼────────┼──────────┼────┼───────┼────────┼────╢
║1│906ED│ 22 (1,5) │ D2 │2020-01-09│PRD │0x19000│0xD50090│Yes ║
╟─┼─────┼───────────┼────────┼──────────┼────┼───────┼────────┼────╢
║2│906EC│ 22 (1,5) │ D2 │2020-01-09│PRD │0x19000│0xD69090│Yes ║
╟─┼─────┼───────────┼────────┼──────────┼────┼───────┼────────┼────╢
║3│906EB│ 02 (1) │ D2 │2020-01-09│PRD │0x19400│0xD82090│Yes ║
╟─┼─────┼───────────┼────────┼──────────┼────┼───────┼────────┼────╢
║4│906EA│ 22 (1,5) │ D2 │2020-01-09│PRD │0x18C00│0xD9B490│Yes ║
╚═╧═════╧═══════════╧════════╧══════════╧════╧═══════╧════════╧════╝
These microcodes are in your BIOS file
Modified splash logo come from (https://forums.tweaktown.com/gigabyte/48…ified-bios.html) Not my work

Intel® Management(ME) 11.8.65.3606 (Firmware) just run flash.bat (You have to run this after every bios flash to use this version)

I will update it when new bios one come out. Will only post updates when i flash my board.


https://mega.nz/#F!chRkEKYS!5TCva-2yKQiIYwLo7Ide9g

F4A Bios
F5C Bios (Just got release on the gigabyte usa Fourm)
F5E Bios
F5H Bios (FW ME 11.8.50.3425 In Bios)
F5I Bios ( New CPU MicroCode from Gigabyte) (Gigabyte Pull This firmware off website)
F5M Bios (New CPU MicroCode from Gigabyte And Improve graphic card compatibility)
Update Intel® Management(ME) 11.8.50.3448 (Firmware)
F5H and F5M (New New CPU MicroCode From Intel Not release from Gigabyte yet)
F5 Bios Update ( 16.0.2.3402 and CPU MicroCode update from Gigabyte)
F6 Bios (Support Optane memory)
F6 Bios update #1 (OROM IRST RAID for SATA - 16.3.0.3377)
F6 Bios update #2(OROM IRST RAID for SATA - 16.5.0.3487) + New CPU MicroCode from Intel.
Intel® Management(ME) 11.8.50.3470 (Firmware)
Intel® Management(ME) 11.8.50.3474 (Firmware)
F6 Bios update #3 (OROM IRST RAID for SATA - 16.5.0.3492) + (EFI GOP Driver SKL-CFL - 9.0.1080)
F7 Bios Update (Update CPU microcode for upcoming CPU - Improve windows boot time) also Intel® Management(ME) 11.8.50.3474 in bios file
F7 Bios Update #1 (OROM IRST RAID for SATA 16.7.0.3513 + fix to flash in QFlash)
F6 Bios Update #4 (OROM IRST RAID for SATA 16.7.0.3513 + fix to flash in QFlash)
Update Intel® Management(ME) 11.8.55.3510 (Firmware)
F10 Bios Update (OROM IRST RAID for SATA 16.7.0.3513 + Optimized for Intel® 9th Gen)
F10 Bios Updare #1 ( New CPU MicroCode From Intel Not release from Gigabyte yet)
F11 Bios Update (Include support for GC-TITAN RIDGE)
F11 Bios Update #1 ( New CPU MicroCode From Intel Not release from Gigabyte yet + Network Orom )
F11 Bios Update #2 (EFI IRST RAID for SATA 17.0.0.3713 )
F11 Bios Update #3 (EFI IRST RAID for SATA 17.0.0.3720 )
F12c Bios Update (Update CPU microcode -Improved system performance and stability)+ (Intel® Magement(ME) 11.8.60.3561 in bios file)
F12C Bios Update RC1 (fix CPU microcode that i screw up)went to AA version now.
F12C Bios Update RC1 Update 1 (EFI IRST 17.0.1.3764 and OROM 17.3.0.3758)
F12 Bios Update (Support Intel 9th generation R0 stepping processors + Update CPU microcode + Update Intel IRST version + Improved system performance and stability)
F12 Update #1 (Update CPU microcode from ubu site)
F11 Update #5 ( new cpu code + intel raid drivers ( Thanks to MysticalOS for testing it on MAC OS)(Stay with F11 if you want to boot in MAC OS)
F13 Bios Update (Update iRST to improve Optane compatibility with 9th Gen R0 CPU) Nothing new that we did not have in F12
F13 Update 1 (CPU MicroCode Update and EFI Intel Gigabit Network Card Update)
F13 Update 2 (CPU MicroCode Update and EFI IRST RAID for SATA 17.3.0.4057)
F13 Update 3 (CPU MicroCode Update and EFI IRST RAID for SATA 17.5.0.4136)
F14 Update ( Support JEDEC DDR4 native 3200MHz memory + CPU update was old had to update to new one from this site)
Intel® Management(ME) 11.8.65.3606 (Firmware)
F14 Update # 1 (CPU update)
F14 Update # 2 ( EFI IRST RAID for SATA + Orom 17.7.0.4404 and EFI GOP Driver SKL-CML 9.0.1092)
Intel® Management(ME) 11.8.70.3626 (Firmware)
F14 Update # 3 (Intel RST 17.8.0.4414 + EFI GOP 9.0.1095 + EFI Intel Gigabit 0.0.24)
F15A ( EFI Intel RST for SATA - 17.8.0.4438 + EFI GOP Driver SKL-CML - 9.0.1098)
F15A Update 1 (EFI Intel RST for SATA - 17.8.0.4460)
F15A Update 2 ( EFI Intel RST for SATA - 17.8.0.4507 EFI GOP Driver 9.0.1102 EFI Network 0.027 and CPU Update D2 )
Intel® Management(ME) v11.8.77.3664 (Firmware)
F15A Update 3 (EFI Intel RST 17.8.3.4687 EFI GOP 9.0.1107 + EFI Intel Gigabit 0.0.29)
Also like to Thanks all the dev for the work they do to make UBU work.
Also like to thanks Lost_N_BIOS for info on how to flash mod bios in Qflash .


Also great video on this board https://www.youtube.com/watch?v=A4C_vjXQ7Qs


As always - it’s your responsibility if anything goes wrong ! :slight_smile:

Hi :O)

Just see the F5e from November 16th.

Can you update your mod please ?

Regards, Ray

F5E now on site.

Hi,
Im interested in modified BIOS, but can you please explain even in short whats the difference, because i dont get it.
Did you updated the build-in drivers??
Or unlocked hidden options?

If its just new drivers that can you at least mention it on your main post that you upgraded the drives from such and such version to such and such (if its not too hard).

P.S. BTW, can you unlock hidden options? I heard that most boards have option to password-protect your SSD/HDD if it supports hardware encryption, but this option only visible on laptops.

Thank you

I only update the rom addons like the intel orom the thing that anyone can do with the UBU tool.It Is not hard this site provides good guides on how to do it .This is just for anyone who don’t what to try it. When you flash bios thing can go wrong. So having a bios they is already mods helps. I also own this board so i flash it first before i upload it. UBU tool won’t update the oroms or the efi in this bios u have to use UEFITool.

F5H Bios Updates

F5l is out with updated microcode (for Meltdown/Spectre mitigation).

on site (update)

no update

F5M Is out and updated on website. Orom is 16.0.0.3155
Version 16.0.0.3267 Will not work on this board.
Also did the same update on the F5H Bios Just in case someone wants to go back a version.

Update F5H and F5M bios to OROM IRST RAID and EFI Rom - 16.0.0.3267
F5H don’t have the Meltdown/Spectre patch that is causing alot of problems.

Update F5H and F5M to Orom 16.0.1.3339

put Intel® Management(ME) 11.8.50.3448 (Firmware) on Website

Hello,

Just wanted to say I flashed the F5h mod (was using Gigabyte Default F5m before) and I am really liking it so far. No stability issues and performance is great. I love being able to use a previous bios version to skip the microcode update but still keep the updated Oroms. Thank you so much for this! I look forward to more updates in the future.

Update F5H and F5M Bios to new Microcode updates 84 versions
This will be the last update on the F5H version bacause F5M has Improve graphic card compatibility.

Thanks for this!

BIOS F5…on the way…

Will do it tonight

update on website

1 - Intel RST(e) OROM and EFI SataDriver
OROM IRST RAID for SATA - 16.0.2.3402
EFI IRST RAID for SATA - 16.0.2.3402
EFI AMI NVME Driver present
2 - Intel OROM VBIOS and EFI GOP Driver
OROM VBIOS SKL-KBL - 1054
EFI GOP Driver SKL-KBL - 9.0.1074
3 - LAN OROM PXE and EFI UNDI - Intel, RTK, BCM, QCA
OROM Intel Boot Agent CL - 0.1.13
EFI Intel Gigabit UNDI - 0.0.19
OROM QCM-Atheros PXE - 2.1.1.5
7 - CPU MicroCode

906EB¦ 02 (1) ¦ 84 ¦2018-01-21¦PRD ¦0x18000¦0xD10400¦Yes
906EA¦ 22 (1,5) ¦ 84 ¦2018-01-21¦PRD ¦0x17800¦0xD28400¦Yes
906E9¦ 2A (1,3,5) ¦ 84 ¦2018-01-21¦PRD ¦0x18000¦0xD3FC00¦Yes
506E3¦36 (1,2,4,5)¦ C2 ¦2017-11-16¦PRD ¦0x18400¦0xD57C00¦Yes
506E8¦ 22 (1,5) ¦ 34 ¦2016-07-10¦PRD ¦0x17800¦0xD70000¦Yes

Thanks so much for keeping these updated! Always excited to try out a new modded bios. I have been sticking on F5H to use microcode revision 70 but I may flash to F5 since it has revision 84 now. Has anyone noticed a difference with 84 yet or is it too soon to tell? I know revision 80 was giving many people issues.