UBU v1.71 ready - 01 April 2019.
Thank you Sonix and Fernando for your replies. Makes sense. Was able to restore Capsule using Uefitool to paste back the bios region, and was able to successfully flashback. I suppose next time I’ll choose option 1 to restore the capsule. Had to use Uefitool to manually update 506E3 to CA microcode as it was missing in the version of Ubu I was using.
Thanks
@Sonix
For ASUS Prime Z390M-Plus the recent BIOS v2203 does offer for CPUID 906ED the µCode B0.
Is it the last one ?
hello guys i put the inside ubu i updated se sata controllers on X99 PLATFORM and i cant no showing nothing why?
hello fernando thanks a lot for this special ubu tool for update bios!!!but i have one problem i posted screenshots!!!i have ASUS RAMPAGE V X99
see this screenshot i press 4 for update sata controllers asmedia and nothing check:http://prntscr.com/n56xpx
how fix that?
@panosxidis :
Wait for the new UBU version 1.71, which has been announced by SoniX for the next week.
i tested another bios z87 z97 and z270 and the same problem why?thanks a lot again fernando
This option has not yet been implemented by SoniX.
he has another method to update asmedia controllers?or no?thanks again
@panosxidis :
Are you sure, that there is an ASMedia 106x Option ROM within the original BIOS for your mainboard? The UBU tool can only update already existing BIOS modules, but not inserting them.
yeap im sure
again update!!! i use 1.71 latest now and the same problem
http://i.prntscr.com/rwhiTFm4S0qQCMwJkkNxJQ.png see the picture
@panosxidis :
Your attached picture indicates, that the UBU tool didn’t detect any ASMedia SATA Controller module within the BIOS.
So there is nothing for being updated.
This is how it looks, when any “Other SATA Controller” module (here: JMicron) has been detected by the UBU tool:
yeap sorry this is my problem thanks sorry!!
i update my cpu microcodes but he has not M for mmtool he has R IS change?
i update my cpu microcode 31 to 36 cpu microcodes latest is greatest???thanks a lot
Thank you very much @SoniX for the UBU update
I do not know if it’s a little bug or not
When I open UBU, I can update the VROC, etc …
I save the bios by renaming, but if I reopen the bios with UBU, I only have that
It’s normal ?
Thanks so much 
tistou77 you put new microcode???i put the latest and my overclock with lower voltage!!!
@ all UBU users:
This original UBU Discussion thread, which had been started in September 2013, has become very voluminous (> 5.000 posts and a lot of attachments).
SoniX’s release of the first official v1.71 platform UBU tool gave me the opportunity to do a cut and to start an updated thread with the same topic, which doesn’t contain anymore all the meanwhile outdated discussions of the former UBU development platforms.
To keep them nevertheless available for interested Forum members and visitors, I have put them into this archive and close the related thread.
Note: The “stickied” new UBU Discussion thread can be found >here<.