cpu00040661_plat32_ver00000014_date#15-06-2015
cpu00040661_plat32_ver00000014_date#15-06-2015.rar (24.1 KB)
OROM VBIOS SkyLake - 1028
[Discussion] UBU Tool related Questions, Reports and Suggestions (125)
EFI GOP Driver SkyLake - 9.0.1035
[Discussion] UBU Tool related Questions, Reports and Suggestions (132)
[quote="ex58, post:2024, topic:30825"]
Zitat von JanCerny im Beitrag #1986
Asus was released new BIOS for Z170-A v1003.
New modules ready to extract:
OROM VBIOS SkyLake - 1028
EFI GOP Driver SkyLake - 9.0.1035
[/quote]
OROM VBIOS SkyLake - 1028
[Discussion] UBU Tool related Questions, Reports and Suggestions (125)
EFI GOP Driver SkyLake - 9.0.1035
[Discussion] UBU Tool related Questions, Reports and Suggestions (132)
@SoniX
Hello 
I don’t think this has been posted before, Intel Lan Gigabit UNDI 0.0.09
Intel Lan Gigabit UNDI 0.0.09.zip (114 KB)
UEFIFind 0.10.3 and UEFIExtract 0.10.5, specially for @lordkag
UEFIExtract_0.10.5_win.zip (1.06 MB)
UEFIFind_0.10.3.zip (1.07 MB)
FYI… Z170-Deluxe shows 3A for microcode which I think is newer than 34?
http://support.asus.com/Download.aspx?SL…DELUXE&p=1&s=50
@SoniX
Thank you for the 1.40!!!
I ve a issue concerning the Efi Intel Gigabyt UNDI, if i start with previously modded bios (U1), the module still remain to 0.0.07, if i use original bios (U2), all run fine.
EDIT: Chipset X79, Intel 82579, in my Bios (installed) it’s still 0.0.07 with the modded one, and 0.0.09 with the original one.
Ghostearth.
@ Ghostearth
Yes, for BIOS Aptio4, if you have already installed version 0.0.07 to version 0.0.09 update until you get. Over time, I decide this issue.
Use original BIOS.
I have just downloaded the new version 1.40 and will use it in the next few days, thank you.
@Sonix
I have used UBU v1.40 and observed that when updating (Option 3, then Sub Option 1) the EFI Intel PRO/1000 UNDI v6.0.24 , UBU tool updates to EFI Intel Gigabit UNDI v 0.0.69 instead of EFI Intel PRO/1000 UNDI v6.9.07 or 6.6.04.
Is it normal ?
Here is the screenshot:
@ 100PIER
Sabertooht X99 - onboard 2 NIC:
LAN
1) ! - Intel® I218V, 1 x Gigabit LAN Controller(s)
2) Realtek® 8111GR, 1 x Gigabit LAN
Since there is one on board LAN controller i218-V, then it must be renewed Gugabit UNDI version 0.0.09.
Rule updating Intel LAN:
If onboard 1 NIC 82579/217/218/219 - Gigabit UNDI v0.0.09 (for Aptio 4 Boot Agent CL v0.1.05)
If onboard 1 NIC 210/211/350 - PRO/1000 UNDI v6.9.07 (for Aptio 4 Boot Agent GE v1.5.72)
If onboard 2 NIC 82579/217/218/219 + 210/211/350 and 1 EFI module - PRO/1000 UNDI v6.6.04 (for Aptio 4 Boot Agent CL v0.1.05 and Boot Agent GE v1.5.72)
If onboard 2 NIC 82579/217/218/219 + 210/211/350 and 2 EFI module - Gigabit UNDI v0.0.09 + PRO/1000 UNDI v6.9.07
My motherboard (Z77) has 1 nic 82579, but ubu 1.40 does not update to UNDI v0.0.09, it stays at 0.0.07 version (previously moded with ubu 1.37).