[Request] BIOS mod ASUS VivoBook 15 X510UR

karfel · March 2, 2025, 7:18pm

Now I know what the problem is (bad edit UEFI editor). give me 30 minutes.

rieidi · March 2, 2025, 7:20pm

What’s the problem? I’m going to leave the house. Then when I get back I’ll record it.

karfel · March 2, 2025, 7:40pm

here, manual editing on Setup PE32.

rieidi · March 3, 2025, 12:49am

Appeared again, but when I click nothing happens.

karfel · March 3, 2025, 4:17am

here, if this still doesn’t work i give up.

Sweet_Kitten · March 3, 2025, 5:47am

@karfel

You didn't find this byte sequence?

karfel · March 3, 2025, 10:08am

Thanks! i totally forgot to check that, and it was there all this time XD.

here.

rieidi · March 3, 2025, 10:09am

What was that? From my basic knowledge, it looks like an instruction and a register with a value.

karfel · March 3, 2025, 10:13am

some motherboard used that for a short block list id, i never thought it could be used to for an allow list id too.

rieidi · March 3, 2025, 10:22am

so… it didn’t show up again.

karfel · March 3, 2025, 10:23am

both user and unsupress at the same time?

rieidi · March 3, 2025, 10:24am

I saw that it didn’t appear, I already unlocked it, entered the shell and did what I had to do, then in the other one it didn’t appear.

rieidi · March 3, 2025, 10:27am

wait, I had to put the user… first?

karfel · March 3, 2025, 10:35am

wait, I had to put the user… first?

nah, if unsupress mod still didn’t work, the last option was use user (05) and unsupress (47 02) at the same time, both did’nt work then…

last thing in the AMITSE PE32 that i cannot understand was here.

Does this also need to be edited, and do I just need to change 12 27 and 13 27 line to the value 00.

@Sweet_Kitten could you give us some advice, thanks!

rieidi · March 3, 2025, 10:44am

I’m leaving home again, but have you thought about doing a dissassembly?

karfel · March 3, 2025, 10:57am

I’m leaving home again,

it’s ok take your time.

but have you thought about doing a dissassembly?

as long as it’s doesn’t brick, we don’t need it for now

Sweet_Kitten · March 3, 2025, 11:47am

No wonder you don't understand, it's the assembly code

I think this piece is irrelevant as it refers to the forms, which at first glance are random.

There are 5 Form Ids at the offset, and the actual setup screen has 5 tabs. I thought changing the following would do the job.

But no luck.

I’ll make my own mod and post it there after a while. And if OP considers it necessary, they can install it.

EDIT:
@rieidi rieidi.zip
Find Setup Settings menu in Advanced. This should open the root of bios tabs.

Changelog

========== Section_Freeform_subtype_GUID_setupdata_setupdata_AMITSESetupData_body.bin ==========

Advanced\SMART Settings | QuestionId 0xB94: Ref from 2E00 to 0100



========== Section_PE32_image_Setup_Setup.sct ==========

Advanced\SMART Settings | QuestionId 0xB94: Form from DF27 to 1027, Name from SMART Settings to Setup Settings

rieidi · March 3, 2025, 12:47pm

I’m not home yet, but should I burn what’s inside the zip into the BIOS? And “OP” it refers to what?

Sweet_Kitten · March 3, 2025, 1:07pm

Yes, this is the patched version of the file from post 15.

I meant original poster, the thread author (you).

rieidi · March 3, 2025, 5:31pm

@karfel @Sweet_Kitten The setup settings appeared, but when I click on it nothing happens (if it should happen.)