Thank you But no need that because mod is succesful ! @Sweet_Kitten You are my hero from now ! All of the menu is unlocked. I can reach everyting including ram xmp profile, cpu voltage, ram voltage,overclock… Those who have one of the models below, You can mod your bios using the really similiar way. [DOES NOT mean that you can flash my bios to your laptop]
Because if you check here (website’s id/password is repo/repo) You will see that all of these models share a unified bios. And If you use that BIOS mod for your NH58DEQ (Not reccomended to use another laptop’s dump bios mod), your laptop’s boot logo will be changed to Monster’s Boot logo. (Clevo turkey’s reseller) You can find image of its in the attachments. (Again, not reccomended)
And please if you find this topic useful, just give @Sweet_Kitten a like. I am sure you won’t be able to find any other source for these models because I wasn’t able to.
1) My laptop supports till 2993 mhz and my 3200 mhz samsung dimms work on 2993 too. Now that the bios unlocked and there is memory frequency option, If I set the value to 3200, Can my laptop handle this or won’t boot ?
2) If the answer of the 1st question is no, What would happen If I changed my ram to Dimms which supports 3200 but 2666 jdec ? Would it work on 2933 or won’t boot again ?
3) As you can see in the attached image, My serial number is not visible neither on bios nor on windows. On both of the platforms, It says ‘‘not appleciable’’. This happened when I updated my bios using InsydeFFT 2 months ago and my serial number gone. Moreover the serial number under the laptop’s cover is also death because it is deleted while using. So when I send my laptop to the service (I have death pixel issiue) They won’t be able to check the serial number and warranty deathline. So I need to add my serial number into bios again. Is that possible ?
4)Can you give me the instructions as you said please ? I want to use your method when a new bios update comes up or even on different Monster (clevo) Laptops. Because In turkey It is impossible to find a source or anything about bios modding and I am the only person who have this now. I want to help other people who are like me and searched for weeks to unlock bios. (if allowed, in that forum too)
Nobody should install other people’s BIOS! This one is just for him. And thanks to the experience of modding this BIOS, now I have a very small clue on how to make a modification of the Lenovo Y540 because they are similar.
Hi friend, i can say that Sweet Kitten is the more brilliant modder here and i too can learn from him
You used the Generalized method for Insyde that i and Sovem used a lot of time ago … this is the Bios Region extracted
I read all thread and got it the variable that RecS searched Variable 13B5 , so activing that it was shown all menu …
But that is far from the rest of bioses we have studied and this is like others touch of luck for us , but i would to check all others bioses to see if
I changed what I said there and said never install it. Nevertheless, I didn’t remove the model numbers similiar to my laptop so that they can find this topic if they search their laptop’s model number on the forum. I guess It’s ok.
I am glad that the time you spent on my BIOS helped you too as an experience to mod another laptop(s).
Only if both laptop and memory support this frequency, then this is possible.
I’m afraid your data is lost forever.
I don’t think I filmed something very useful. The video is only available via the link. This is the most I can do. And I just don’t like text instructions, because it makes people ask even more questions.
I think I need your help for the last time sir as far as I remember, after I flashed the modded bios, overclock menu was enabled. But currently (I think happened after load setup defaults) It is in grey colour. It is visible but cannot enter the menu.
It works! btw you said above that no one should install others’ bios. Does that include nh58deq users too or just the models I mentioned above? Shouldn’t I share this to somenone who has the same laptop ?
@Zucker2k , we know how to unlock Lenovo Y700 15-ISK. If you need, make a request and post a link to download the BIOS dump made by backup tools. Your message will not be missed.
Hi friend, Sweet Kitten wrote that we can do (i know that can be some difficulties, as there is the FLOCKDN, but he knows how to do disabling ME) , actually there is only this variable to lock the eeprom :
0x71114 One Of: BIOS Lock, VarStoreInfo (VarOffset/VarName): 0x4B3, VarStore: 0x1234, QuestionId: 0x51D, Size: 1, Min: 0x0, Max 0x1, Step: 0x0 {05 91 80 02 81 02 1D 05 34 12 B3 04 10 10 00 01 00} 0x71125 One Of Option: Disabled, Value (8 bit): 0x0 (default) {09 07 04 00 30 00 00} 0x7112C One Of Option: Enabled, Value (8 bit): 0x1 {09 07 03 00 00 00 01} 0x71133 End One Of {29 02}
There are two ways to flash this bios :
1. Fpt tool 2. Frashrom Tool (USB)
Please make the result file and upload here for Sweet Kitten … i trusth in him, he is the best modder here ! Regards
I saw the thread you created. I thought you were done with registers already, and now you just ask for menus unlock. So the situation is different, and I should apologize for disturbing you, @BDMaster .
This doesn’t unlock the bios. I have it disabled with H2OUVE tool but the bios is still locked. I’ve used the tool to change everything that can be changed, including overclocking my RAM but it’s not the most convenient way. I just want to be able to access the "Advanced Menu" inside bios and make changes there.
0x2E4 = Overclocking Feature Enable = (1) 0x2E6 = CPU Flex Ratio Override (1) 0x2E7 = CPU Flex Ratio Settings (1) 0x50F = H2OUVE Support (1) 0x1E9 = EC Turbo Control Mode (1) 0x3EC = Core Max OC Ratio (23) 0x2DB = Expected CPU Frequency
0x180 = DVMT Pre-Allocated (08 = 256MB) 0x181 = DVMT Total Gfx Mem (03 = Max)
The tool can access other bios modules besides the three setup menus, ie. Setup, Setup Default, and Custom. I wonder if the unlock is outside the setup menus, and inside the other menus?
I have the PM where i posted the modified bioses to test and at last he flashed it by Flashrom and he said me that the last one i made was the only one he was be able to flash into eeprom … We used H2OUVE and the WinTest like ataigun , you know Outsyde etc. you were there too … so on Acer we disabled the ME and he unlocked the Descriptor, but after all there was a lock to reflash the mod … and making an hard modify he flashed by flashrom it After that i wrote again to him to post all and make a tutorial, but he got the goal vanished (his laptop have got a Linux) Regards
as far as I remember, after I flashed the modded bios, overclock menu was enabled. But currently (I think happened after load setup defaults) It is in grey colour. It is visible but cannot enter the menu.
I saw the thread you created. I thought you were done with registers already, and now you just ask for menus unlock.