@Lost_N_BIOS I follow instruction in page 1 but couldn’t work around with modded bios on H110 D3A Gigabyte, not with Q-Flash & Efiflash either, could you help?
Bios included
Thx dude so I will try a pencil first than.
---------------------
Hey so I bought a CPU now, but it’s r0 stepping. I flashed my BIOS with the p0 Microcode, can I flash Stock bios & reflash a modded one again with r0 Microcode?
Hi! I got this message when modyfing my BIOS https://imgur.com/a/JgGc0if
Why? I flashed the bios skipping the modifications to this vBIOS, everything works, but I’d rather do it again so that everything is as it should be.
Just dump your BIOS, add r0 and reflash. No need to go back to stock in between. But yes: You can always resort to stock and start anew. (If you got a SKL/KBL. One should not go back to stock with only CFL around ;-))
@shadteez - So, that’s a little unclear, are you asking me to make you a mod BIOS? If yes, OK I can do 
Please tell me your old CPU model and what is your new CPU model AND it’s SSPEC (# off top of CPU)
@shadteez - So, that’s a little unclear, are you asking me to make you a mod BIOS? If yes, OK I can do
Please tell me your old CPU model and what is your new CPU model AND it’s SSPEC (# off top of CPU)
sorry to bother, long story short is I find the way to flash my mod bios to the mainboard H110 D3A using FPT, problem solved, now I can run 9100F smoothly on H110-D3A
but I still can’t directly flash the mod bios thought Q-Flash in Gigabyte mobo, my old CPU is G3930, new one is 9100F 7W
If you got time for this, a bios which can be flashed directly in mobo is very appricitate,just in case I have to flash it again
@shadteez - It’s OK Good to hear you flashed it finally and are using your new CPU at least 
And sorry from me too, if you would have explained that more exact earlier I could have told you how to fix
Here is how to make mod BIOS Q-Flash possible, see post #79 - [OFFER] Gigabyte GA-Z370-Aorus Gaming 7 BIOS mod (6)
I reflashed my Mainboard now, my ME Version was downgroaded from 11.7 to 11.6.10.1196 so I guess the flash was successful. I want to mod my CPU now, it says sre11 on the CPU so it’s r0. Im still unsure about how to conduct the two CPU-Pins, is a pencil enough for Testing? So I Just draw a thick layer over the two Pins?
Pencil can work, but is the most unreliable method. Just give it a try, but if you get the typical "immediate switch off" try a better method (I jusest conductive silver paint/adhesive meant for trace repairs) before assuming that anything else does not work. As long as you do not connect the wrong pads or soil the socket, you can hardly damage anything by trying SKTOCC mods. (Unlike isolation mods. If these are necessary and done incorrect, they can fry board and/or CPU on first try.)
So I did it like this😬Will test it now, wish me luck
Sadly it doesn’t work so I ordered conductive silver on ebay
cbdfdb
@Lost_N_BIOS Hey mate could you make me a modded bios for an i7 8750H board? Ive got a Xiaomi Mi Gaming laptop 2nd gen (i7 8750h gtx 1060m 6g, got pretty good HW for the price. The thing is that none of the software is up to date. Some Users are desperate about it PL1 and EDP throttling all the time on load. Throttlestop doesnt unlock shit when it comes to the turbo times with any configuration(hopefully i could set them to something like 1202494019, but seems i cannot its locked from bios). Its no thermal problem i run 71-77 on max load most times on this laptop with regular MX4 paste, many limits to push, the problem is its just badly configured,. My specific chip doesnt hit the best UV, i can only get max -0.139(some other users did go stable up to -205mv) this laptop has really good cooling system tho. The software is outdated date back to 2018. I tried to fix the power limit throttling in the proccess broke/corrupted 2 windows OS with sensitive data. I am sure its the BIOS now. I modded vbios (UV+OC) on my gfx card 1060 6g and it runs really good, i got stuck on the mb bios tho, never edited something like this and i am afraid not to break anything. Any help is welcome, there is no mod bios anywhere in the net. Bios are 604(newest, seems to have lower power limits) and 402(most reliable for performance still hits the pl tho, i can get 82w full load max out of it unti in some secs it hits PL1 and EDP and goes back to 45w TDP).
here are both the bios files, i linked both because you could maybe configure them easier or more optimal if you had a look on both files? I wish that you update the bios like the microcode and whatever possible to latest and remove that pl1 edp constant Throttle( basically raise the power limits and turbo times, i would be really greatful and i think most users of this laptop, beeing power users would be!
These are my processor specs https://prnt.sc/s1h95t I am running Intel 300 series chipset HM370 A30D
Regards, and Many thanks in advance!
thank a tons man, this could really help me
from what I know, you can’t edit the BIOS from an .exe file. This must be a .bin file extracted from your motherboard chip. You can extract it using the CH341A programmer with a special clip. Only after extracting BIOS, you can modify it using the CoffeTime tool. Also, the only way to upload a modified BIOS is through the programmer. Uploading a modified BIOS is not a regular update, so you will not do it from your computer, you must use an external tool which is the previously mentioned programmer.
Ah yes you are right, I have to isolate the blue pins. Thought I only have to connect the two pins on an asus board
@Lost_N_BIOS Hey mate could you make me a modded bios for an i7 8750H board? Ive got a Xiaomi Mi Gaming laptop 2nd gen (i7 8750h gtx 1060m 6g, got pretty good HW for the price. The thing is that none of the software is up to date. Some Users are desperate about it PL1 and EDP throttling all the time on load. Throttlestop doesnt unlock shit when it comes to the turbo times with any configuration(hopefully i could set them to something like 1202494019, but seems i cannot its locked from bios). Its no thermal problem i run 71-77 on max load most times on this laptop with regular MX4 paste, many limits to push, the problem is its just badly configured,. My specific chip doesnt hit the best UV, i can only get max -0.139(some other users did go stable up to -205mv) this laptop has really good cooling system tho. The software is outdated date back to 2018. I tried to fix the power limit throttling in the proccess broke/corrupted 2 windows OS with sensitive data. I am sure its the BIOS now. I modded vbios (UV+OC) on my gfx card 1060 6g and it runs really good, i got stuck on the mb bios tho, never edited something like this and i am afraid not to break anything. Any help is welcome, there is no mod bios anywhere in the net. Bios are 604(newest, seems to have lower power limits) and 402(most reliable for performance still hits the pl tho, i can get 82w full load max out of it unti in some secs it hits PL1 and EDP and goes back to 45w TDP).
here are both the bios files, i linked both because you could maybe configure them easier or more optimal if you had a look on both files? I wish that you update the bios like the microcode and whatever possible to latest and remove that pl1 edp constant Throttle( basically raise the power limits and turbo times, i would be really greatful and i think most users of this laptop, beeing power users would be!
These are my processor specs https://prnt.sc/s1h95t I am running Intel 300 series chipset HM370 A30D
Regards, and Many thanks in advance!
@filippos96 - Not sure what you need here?? Do you mean you need unlocked BIOS menus? If yes, please do the following below, and with the biosreg.bin file also include the latest BIOS exe in same zip/rar, this is all I need for now.
Please upload to tinyupload.com or uploadfiles.io - thanks!
Usually that is enough. Also I have never heard of boot up problems when not isolating those two pins. These are just former "reserved" contacts that had some acessory function, but are now reused for ground. Some OC motherboards applied a voltage here, which is now shorted to ground when inserting a CFL. But that current is not high enough to trigger an emergency shudown and obviously CFL does not care whether some of its supposed-to-be ground pins are leaking a bit of voltage into ground. However especially Asrock boards, especially MOCF, are known to fry their pins right out of the socket with this short circuit. Which kind of solves the problem as well, but dedicated isolation is recommended. On Asus I think only some of the high end ROG use these pins. I run CFL without isolation on both Ranger and Sabertooth and had no issues.
However: You photo clearly shows almost no graphite between the two pads, so SKTOCC is not closed. This is a common problem when experimenting with a pencil as the substrate is very smooth, so no "lead" is shead there. Conductive silver will certainly solve this problem.
@Lost_N_BIOS Hey mate could you make me a modded bios for an i7 8750H board? Ive got a Xiaomi Mi Gaming laptop 2nd gen (i7 8750h gtx 1060m 6g, got pretty good HW for the price. The thing is that none of the software is up to date. Some Users are desperate about it PL1 and EDP throttling all the time on load. Throttlestop doesnt unlock shit when it comes to the turbo times with any configuration(hopefully i could set them to something like 1202494019, but seems i cannot its locked from bios). Its no thermal problem i run 71-77 on max load most times on this laptop with regular MX4 paste, many limits to push, the problem is its just badly configured,. My specific chip doesnt hit the best UV, i can only get max -0.139(some other users did go stable up to -205mv) this laptop has really good cooling system tho. The software is outdated date back to 2018. I tried to fix the power limit throttling in the proccess broke/corrupted 2 windows OS with sensitive data. I am sure its the BIOS now. I modded vbios (UV+OC) on my gfx card 1060 6g and it runs really good, i got stuck on the mb bios tho, never edited something like this and i am afraid not to break anything. Any help is welcome, there is no mod bios anywhere in the net. Bios are 604(newest, seems to have lower power limits) and 402(most reliable for performance still hits the pl tho, i can get 82w full load max out of it unti in some secs it hits PL1 and EDP and goes back to 45w TDP).
here are both the bios files, i linked both because you could maybe configure them easier or more optimal if you had a look on both files? I wish that you update the bios like the microcode and whatever possible to latest and remove that pl1 edp constant Throttle( basically raise the power limits and turbo times, i would be really greatful and i think most users of this laptop, beeing power users would be!
These are my processor specs https://prnt.sc/s1h95t I am running Intel 300 series chipset HM370 A30D
Regards, and Many thanks in advance!
@filippos96 - Not sure what you need here?? Do you mean you need unlocked BIOS menus? If yes, please do the following below, and with the biosreg.bin file also include the latest BIOS exe in same zip/rar, this is all I need for now.
Please upload to tinyupload.com or uploadfiles.io - thanks!
That would be huge help if you could unlock the menus, i already posted the bios link, where can i find the biosreg.bin so i can make an archive to upload on uploadfiles.io??
If you could also change the bios values like this do so cpu reads -31.999w meaning that it doesnt throttle back to 45W TDP i would be greatful
Advanced > Power & Performance > CPU - Power Management Control > CPU VR Settings > Core/IA VR Settings
Set IMON Slope to 50
Set IMON Offset to 31999
Set IMON Prefix change to negative "-" so it doesnt throttle all the time
Thanks in advance!
Note that my MB is propably Quanta brand renamed by Xiaomi-Timi
[GUIDE] Coffee Lake CPUs on Skylake and Kaby Lake motherboards original thread is complicated and outadated.
what should because some apps have new versions and doesnt match with the old guide plus there is no vbios.dat i cant find it can somebody pls help me im using asrock h110m dvs r3.0 and g4560.
i bought i3 9100f