it kept gave me unknown image error
ME: 11.8.94.4494_5mo.rar (4.2 MB)
Source
1 Like
Excellent thanks!
Did you test the 11.8.94.4494_COR_H_DA_PRD_RGN_Cut.rar (518.5 KB) file dsanke posted on your BGA1440 modded system?
Can you please tell me if if everything worked?
i dont have any lga 1151 board, so i didnt test it.
I already tested it myself and it works perfectly.
I first looked at it with ME Analyzer and it looked the same as the other ones and it had the same warnings (from the cut-out portions) so I tried it and it works fine!
1 Like
Hi, sorry to stir up an old thread again, just wondering, @Bata were you able to get a xeon working on your B250m-c? I’ve been trying to boot a 1245 v5 with no success (trying to boot without RAM triggers the beep code, so I suspect the cpu is detected correctly?). I tried the BIOS that @dsanke provided in the thread, and also tried setting the reserve bit myself on the latest version. Would appreciate any guidance or pointers 
I tried to cut CSE ME 11.8.95.4551 Prod CorpH KBP BSF GCF-H A SPT-H D:
https://winraid.level1techs.com/uploads/short-url/31eafOgnXlKArB85cjhI2PrGD6N.zip
I used the command
python me_cleaner.py ‘CSE ME 11.8.95.4551 Prod CorpH KBP BSF GCF-H A SPT-H D.bin’ -O ME_Output.bin -w IVBP,MFS,FLOG,UTOK,ISHC -t
The output file was cut to 6.524.928 Bytes but it is still too big. Is any help available?
@Maison1 i dont know what me_cleaner you used to do that.
the “-t” was added by me in my fork, if you use the original version of corna, you have the correct result.
11.8.95.4551_COR_H_DA_PRD_RGN_Cut.bin.zip (498.9 KB)
3 Likes
Thank you. I used your fork.
hello, I haven’t looked at the thread for a while, that board worked immediately with xeon bios from dsanke https://winraid.level1techs.com/uploads/short-url/1sMWzarNsYOP0KcybhxhdKbny2F.rar
just check if it’s the same label there are 2 versions of b250m-c, One is PRIME the other one is not a prime, mine was a Prime B250m-c