i use every program here, including coffeemod, ubu, and MMTool, and guides revolving around this forum. just doing stuff back and forth (i dont do everything automatically)
Did everything function as it is? like Lan, rgb, bios settings, everything? also the mcode i took from platomav github, should to be the latest if there is any update. yep i update the orom, gop vbt, and efi gop.
if you didnt mind, and if your boot drive is on GPT, could you test with these:
CSM Disabled, Above 4G Decoding enabled with Clever Access Memory or Resizable Memory enabled, iGPU enabled with Multi Monitor enabled and see if both your gpu and the igpu would work?
Sure, I can test, but the first issue I encountered was the PCI-E x16 and the x8 not working, and the PCI-E x1 working fine the 2 first (bottom one didnāt work), the first nvme works fine, the bottom I didnāt test, as of right now I can only test the CSM Disabled, strange thing is that the PCI-E patch in CoffeeTime isnāt avaliable to patch in the latest bios version, maybe I have to use the bios version 4.10, this version it appears to patch the PCI-E in CoffeeTime, but then the Clever Access Memory isnāt available for me to test
I did it, itās now working fine with the bios v4.10, I extracted the microcode from your bios (I tried downloaded the latest microcode from platomav github but it didnāt work), I also downloaded the updated GOP Driver (if you need just drop inside the CoffeeTime v0.99 folder, the files name are the original, but the files are updated, so just replace) Updated Microcode+GOP Driver.rar (1.7 MB)
now the graphics card works just fine, I flashed the bios using the CH341A, you need to do the 3.3v mod to work safely 3.3V CH341a Signal Output Modification and then use this diagram to connect the CH341A, thanks to this topic: Winraid Topic
okay, the reason i use beta bios 4.21 is because it adds Resizable Bar option a.k.a Clever Access Memory so that if you do have a gpu that capable of it, you could use it without bios mods for rebar, so yeah wonder any reason to use 4.10 XD
The only reason to use the 4.10 was the graphics card, with other bios the gpu didnāt work, if you can somehow patch the PCIe in the newer version I can test, my boot drive is GPT, and right now I tested the āAbove 4G Decoding enableā (not sure what it does), and enable iGPU then I connected 1 monitor in the display port on GPU and another hdmi in the motherboard, both work fine in windows, and the iGPU shows up in task manager
There is no communication on the PCI-e x16, I tested 1 amd gpu, 1 nvidia, I tested a PCI-e x1 to nvme, wifi card, none of them worked, thatās because the lacking of the PCI-e patching, and every one worked on the motherboard PCI-e x1
I didnāt read it online, itās explained in the CoffeeTime, meaning if you donāt apply the PCIe patch the x16 wonāt work (because itās required for coffelake cpus)
I was hoping that I would be be able to enable the TPM - therefore having a working ME firmware.
Is that a lost cause with mutant CPUs?
I donāt have a xeon CPU, I have a i9-9880hk cpu.
with the latest me 11.8 or 7 wether its cut or stock, usually it wont let mutant cpus to boot, if you want ME to work normally then use a normal cfl/r cpu and pin mod it, hence it could run on me 11.7 con normally .
I got a Zotac EN51050 Mini PC, the orginal configration is i5-7500T,8G RAM,1TB NVME,GTX1050 mobile,and I want to update to 8700 and support my GTX1030 mobile and GTX 1660s MXM module;
Is the mod bios compatiable with en1070?
I download the EN51050 BIOS file but i attatched it
